Close
Copy of WEG W21 – Aluminium Frame – Premium Efficiency – IE3
Applications
- Pumps
- Fans
- Crushers
- Conveyor belts
- Mills
- Centrifugal machines
- Presses
- Elevators
- Packaging equipment
- Grinders and others.
Close
WEG BFGC4 Series – Ex d(e) IIC T4 Gb (Ex tb IIIC T125ºC Db IP6X)
Description
- BFGC4 is one of WEG flameproof TEFC three phase motors lines for IIC group of gas and combustible dust and is available for shaft height 250 up to 315M.
- BFGC4 line is available for Low voltage with the following powers:
- BFGC4 – Low voltage (≤ 690 V 50 Hz):
| Powers (kW) | Speed |
|---|---|
| 55 up to 132 | 3000 RPM |
| 55 up to 132 | 1500 RPM |
| 37 up to 90 | 1000 RPM |
| 37 up to 75 | 750 RPM |
- BFGC4 – Low voltage (≤ 690 V 60 Hz):
| Powers (kW) | Speed |
|---|---|
| 66 up to 158 | 3600 RPM |
| 66 up to 158 | 1800 RPM |
| 44 up to 108 | 1200 RPM |
| 36 up to 90 | 900 RPM |
- BFGC4 – Standard Ex d IIC T4 Gb motor
- BFGCE4 – Ex d e IIC T4 Gb motor
- BFGCD4 – Ex d IIC T4 Gb and Ex tb IIIC Db IP6X motor
- BFGCED4 – Ex d e IIB T4 Gb and Ex tb IIIC Db IP6X motor
Close
WEG Brake Motor – Cast Iron Frame – Standard Efficiency – IE1
Applications
- Cranes
- Elevators
- Looms
- Hoists
- Machine tools
- Continuous conveyors
- Winding machines
Close
WEG Ex Non Sparking Motors – EEx nA – Standard Efficiency – IE1
Application
Environment where an explosive atmosphere will probably not be present under normal operating conditions and, if any, this will be for short period of time, that is, an explosive atmosphere may be present accidentally. The environments are classified as Zone 2, groups IIA, IIB and IIC, and as Zone 22, groups IIA, IIB and IIC. The most common gases included in this classification are: acetone, ammonia, benzene, butane, butanol, buthylic alcohol, ethane, ethanol, acetate of ethyl, gasoline, heptanes, hexanes, natural gas, methanol, oil naphtha, propane, propanol, toluene, esthyrene, solvents in general, acetaldehyde, cyclopropane, diethylic ether, ethane, monoxide of carbon, acetylene, butadiene, oxide of ethane, hydrogen, oxide of propylene and gases containing over 30% of hydrogen.
Close
WEG Explosion Proof – NEMA High Efficiency Motors
Applications
- Gasoline
- Flour / feed mills
- Grain Elevators
- Fans
- Pumps
- Blowers
- Material handling equipment
- Other applications requiring motors UL or CSA listed for hazardous locations
Close
WEG Explosion Proof Motors – EEx d / EEx de (ATEX) – Standard Efficiency – IE1
Applications
Environments containing flammable gases or vapour continuously, intermittently or periodically in enough amount to generate explosive or flammable mixtures arising out of repairs or maintenance services.The most common locations of Zone 1 and 2, group IIA and IIB are those where the following gases are found present: oil, naphtha, benzene, ammonia, propane, diethylic ether, acetone, alcohol, industrial methane, natural gas.
The main applications include fans, blowers, crushers, conveyor systems, mills, cranes and other applications located in areas that require explosion proof motors
Close
WEG Fan and Exhaust – Aluminium Frame – Dahlander 4/2 Pole – Constant Torque
Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG Fan and Exhaust – Aluminium Frame – Dahlander 4/2 Pole – Variable Torque
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG Fan and Exhaust – Aluminium Frame – Dahlander 8/4 Pole – Constant Torque
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG Fan and Exhaust – Aluminium Frame – Dahlander 8/4 Pole – Variable Torque
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG Fan and Exhaust – Cast Iron Frame – Dahlander 4/2 Pole – Variable Torque
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG Fan and Exhaust – Cast Iron Frame – Dahlander 8/4 Pole – Constant Torque
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG Fan and Exhaust – Cast Iron Frame – Dahlander 8/4 Pole – Variable Torque
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG Fan and Exhaust – Cast Iron Frame – Independent Winding 6/4 Pole – Constant Torque
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG Fan and Exhaust – Cast Iron Frame – Independent Winding 6/4 Pole – Variable Torque
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG Increased Safety Motors – EEx e (ATEX) – Standard Efficiency – IE1
Application
Environment where an explosive atmosphere will probably not be present under normal operating conditions and, if any, this will be for short period of time, that is, an explosive atmosphere may be present accidentally.The environments are classified as Zone 2, groups IIA, IIB and IIC. The most common gases included in this classification are: acetone, ammonia, benzene, butane, butanol, buthylic alcohol, ethane, ethanol, acetate of ethyl, gasoline, heptanes, hexanes, natural gas, methanol, oil naphtha, propane, propanol, toluene, esthyrene, solvents in general, acetaldehyde, cyclopropane, diethylic ether, ethane, monoxide of carbon, acetylene, butadiene, oxide of ethane, hydrogen, oxide of propylene and gases containing over 30% of hydrogen.
Close
WEG IP23 – Cast Iron Frame – High Efficiency – IE2
Applications
- Pumps
- Fans
- Kneader and mixer machines
- Cutter and sawing machines
- Pressing machines
- Industrial equipment
- Conveyors
- Blowers
- Compressors
- Machinery
- Cranes
- Packaging equipment
Close
WEG IP23 – Cast Iron Frame – Standard Efficiency – IE1
Applications
- Pumps
- Fans
- Kneader and mixer machines
- Cutter and sawing machines
- Pressing machines
- Industrial equipment
- Conveyors
- Blowers
- Compressors
- Machinery
- Cranes
- Packaging equipment
Close
WEG IP55 – Cast Iron Frame – Single-Phase Motors
Typical Applications
- Fans
- Compressors
- Pumps
- Pulleys
- Cranes
- Continuous conveyors
- Silo unloaders
- Grinders
- Other general application
Close
WEG ODP – High Efficiency
Applications
Specially developed line for industrial and commercial pumping applications
- Water pumping
- Process
- Transfer and circulating pumps
Close
WEG ODP – JM Type High Efficiency
Applications
Specially developed line for industrial and commercial pumping applications.
- Water pumping
- Process
- Transfer and circulating pumps
- Other
Close
WEG ODP – JP Type High Efficiency
Applications
Specially developed line for industrial and commercial pumping applications.- Water Pumping
- Process
- Transfer and circulating pumps
- Other
Close
WEG Pump HGF – Cast Iron Frame
The HGF line is differentiated by its high performance combined with low maintenance costs. This product line is ideal for operating in the toughest applications, which require increased strength and durability of motors.
The HGF motors are being designed according to the highest technological standards available in the market, using modern computer software for mechanical, electrical and thermal analysis evidenced by performing rigid tests and checks. The result of this innovative development is a flexible product, suitable to the requirements of international standards and fully aligned with world market trends. This states WEG commitment not only with customers but also with the environment, bringing global solutions more and more optimized for its products and processes.
Close
WEG TEFC – JM Type High Efficiency
Applications
Specially developed line for industrial and commercial pumping applications
- Water pumping
- Process
- Transfer and circulating pumps
Close
WEG TEFC – JP Type High Efficiency
Applications
Specially developed line for industrial and commercial pumping applications- Water pumping
- Process
- Transfer and circulating pumps
Close
WEG TEFC – NEMA High Efficiency Motors
Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG TEFC – W21 High Efficiency
Applications
Specially developed line for industrial and commercial pumping applications
- Water pumping
- Process
- Transfer and circulating pumps
Close
WEG TEFC – W22 IEEE-841™ NEMA Premium® Efficiency
Description
WEG’s W22 NEMA Premium motors meet or exceed all NEMA Premium® requirements for energy efficiency. These WEG IEEE 841 W22 NEMA Premium Efficiency Mill and Chemical Duty Motors are specially suited for Pulp and Paper Mills, Petrochemical, Steel Mills and applications requiring Severe Duty long life motors.Applications
- Pumping applications;
- Pulp and paper mills;
- Petrochemical;
Close
WEG W21 – Aluminium Frame – Premium Efficiency – IE3
Typical Application
- Pumps
- Fans
- Crushers
- Conveyor belts
- Mills
- Centrifugal machines
- Presses
- Elevators
- Packaging equipment
- Grinders and others.
Close
WEG W21 – Aluminium Frame – Standard Efficiency – IE1
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyor belts
- Mills
- Centrifugal machines
- Presses
- Elevators
- Packaging equipment
- Grinders and others.
Close
WEG W21 – Cast Iron Frame – High Efficiency – IE2
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG W21 – Cast Iron Frame – MEPS South Korea
W21 MEPS South Korea Line
Mandatory efficiency grade label
Korea has introduced a mandatory Minimum Energy Performance Standard (MEPS) scheme for low voltage motors. The MEPS scheme applies to 2-, 4-, 6- and 8-pole motors in the 0.75-200 kW range, up to 600V 60Hz. The following types of motors are excluded: hazardous area, TEAO and TENV, smoke extraction, marine and 2-speed motors, and motors with sleeve or thrust bearings.
TEAO = Totally Enclosed Air Over, rated TENV = Totally Enclosed Not Ventilated
In order to answer the necessities of our customers in South Korea, WEG have been developing the exclusive line W21 KS according to MEPS. The result is a extraordinary line where you can find the flexibility and quality of WEG (recognized internationally) and respecting the Korean regulations.
Further these qualities, the Korean market will have the benefits of production in our factory in China, improving the speed and quality of our treatment for customers in Asia.
Close
WEG W21 – Cast Iron Frame – Premium Efficiency – IE3
Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG W21 – Cast Iron Frame – Standard Efficiency – IE1 – 50°C
Typical Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG W21 – Cast Iron Frame – Standard Efficiency – IE1 – GOST
Applications
- Pumps
- Fans
- Crushers
- Conveyors
- Machine tools
- Milling applications
- Centrifugal machines
- Presses
- Elevators
- Looms
- Grinders
- Woodworking
- Cooling
- Packaging equipment
- Other severe duty applications
Close
WEG W22 High Efficiency
Description
High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency and Low cost of Ownership throughout the entire motor lifetime have been the basis for the W22 development. A design created to maximize performance and energy savings.