Showing 1–12 of 52 results

Show sidebar
Close

Fuji Electric Base Board Micrex-SX SPH

Base Board Micrex-SX SPH type
  • NP1BS-03
  • NP1BS-06
  • NP1BS-08
  • NP1BS-11
  • NP1BS-13
  • NP1BP-13
  • NP1BS-08S
  • NP1BS-11S
  • NP1BS-13S
  • NP1BP-13S
  • NP1BS-08D
  • NP1BS-11D
  • NP1BS-13D
  • NP1BP-13D
 
Close

Fuji Electric CPU Module PLC Micrex-SX SPH Series

Features   Ultra high-speed processing The CPU module carries out the ultra high-speed processing in basic instructions as follows: SPH300 in 20ns, SPH200 in 70ns, SPH2000 in 30ns, and SPH3000 in 9ns.   Muiti-CPU configuration (SPH300/SPH2000/SPH3000) Up to 8 CPUs can be configured while realizing the high-speed control by load distribution.   Redundancy (SPH300/SPH2000) The 1 to 1 hot standby and the N to 1 cold standby improve the system safety and reliability. (The N to 1 cold standby is provided only to SPH300.)   IEC 61131-3 The series is fully compliant with the international standard language IEC 61131-3, which enables you to prepare the programming valid worldwide.   Compatible with USB and user ROM The SPH300, SPH2000 and SPH3000 are provided as the USB and the user ROM versions in the separate format. (NP1PS-32R/74R/117R/245R, NP1PM-48R/48E/256E/256H and NP1PU-048E/256E)   Large-capacity battery (optional) It is possible to extend the memory backup time to three and a half years (at 25°C) by adding an optional large-capacity battery to the SPH300 (74K/117K/245K steps).   SPH200
  • NP1PH-08
  • NP1PH-16
SPH300EX
  • NP1PS-74D
SPH300
  • NP1PS-32
  • NP1PS-32R
  • NP1PS-74R
  • NP1PS-117R
  • NP1PS-245R
SPH2000
  • NP1PM-48R
  • NP1PM-48E
  • NP1PM-256E
  • NP1PM-256H
SPH3000MG
  • NP1PU1-256NE
SPH3000MM
  • NP1PU2-048E
  • NP1PU2-256E
SPH3000
  • NP1PU-048E
  • NP1PU-128E
  • NP1PU-256E
Close

Fuji Electric FRENIC AQUA Series Inverter

Inverter Fuji Electric for Pumps and Blowers High performance enable by the comprehensive use of Fuji technology. Easy maintenance for the end-user. Maintains safety and protects the environment. Opens up possibilities for the new generation.
Close

Fuji Electric Frenic Eco 3-phase 200V 0.75kW – 110kW

Inverter Fuji Electric Frenic Eco 0.75kW - 110kW 3-phase 200V models
  • FRN0.75F1S-2A : 0.75kW
  • FRN1.5F1S-2A : 1.5kW
  • FRN2.2F1S-2A : 2.2kW
  • FRN3.7F1S-2A : 3.7kW
  • FRN5.5F1S-2A : 5.5kW
  • FRN7.5F1S-2A : 7.5kW
  • FRN11F1S-2A : 11kW
  • FRN15F1S-2A : 15kW
  • FRN18.5F1S-2A : 18.5kW
  • FRN22F1S-2A : 22kW
  • FRN30F1S-2A : 30kW
  • FRN37F1S-2A : 37kW
  • FRN45F1S-2A : 45kW
  • FRN55F1S-2A : 55kW
  • FRN75F1S-2A : 75kW
  • FRN90F1S-2A : 90kW
  • FRN110F1S-2A : 110kW
Close

Fuji Electric Frenic Lift 3-phase 200V

Frenic Lift 3-phase 200V models
  • FRN5.5LM1S-2EA : 5.5kW
  • FRN7.5LM1S-2EA : 7.5kW
  • FRN11LM1S-2EA : 11kW
  • FRN15LM1S-2EA : 15kW
  • FRN18.5LM1S-2EA : 18.5kW
Close

Fuji Electric Frenic Lift 3-phase 400V

Optimum Exclusive Design for Passenger Elevators
  • A braking circuit is built in the inverters of all the capacities
  • Built-in PG feedback circuit is standard equipment.
  • An optional keypad is available
Close

Fuji Electric FRENIC Lift Series Inverter

Fuji Electric FRENIC Lift Series of exclusive AC Drives for operation of elevators are specially designed to have a number of improved features over previous elevator AC Drives, such as vastly lower torque ripple. We have incorporated the functions that customers find most necessary in elevator controls to provide an AC Drive that delivers performance that fits your elevator system.
Close

Fuji Electric Frenic Mini 1-phase 200V 0.1kW – 2.2kW

Features
  • High starting torque, at 150% or more
  • Trip-free operation
  • Stable operation even for a step load
  • Braking resistor connectable to the inverter
  • Reduce motor instability at low speed
  • The highly used functions for and pumps
    • Automatic energy-saving provides as a standard functions
    • PID control function
    • Cooling fan On/Off control function
  • Ideal functions to serve a multiplicity of need for small-capacity inverters
    • Compatible with a wide range of frequency setting
    • The output frequency can be set to a maximum of 400Hz
    • A transistor output is provided
    • Two point can be set for a non-linear V/f pattern
  • Compact
  • Simple operation and wiring
  • Interface for peripheral devices and comprehensive protective functions
  • Flexible through optionals
Close

Fuji Electric Frenic Mini 3-phase 400V 0.4kW – 3.7kW

Inverter Fuji Electric Frenic-mini 0.4kW - 3.7kW 3-phase 400V Models
  • FRN0.4C1S-4A : 0.4kW (1/2HP)
  • FRN0.75C1S-4A : 0.75kW (1HP)
  • FRN1.5C1S-4A : 1.5kW (2HP)
  • FRN2.2C1S-4A : 2.2kW (3HP)
  • FRN3.7C1S-4A : 3.7kW (5HP)
  EMC filter built-in type
  • FRN0.4C1E-4A : 0.4kW (1/2HP)
  • FRN0.75C1E-4A : 0.75kW (1HP)
  • FRN1.5C1E-4A : 1.5kW (2HP)
  • FRN2.2C1E-4A : 2.2kW (3HP)
  • FRN3.7C1E-4A : 3.7kW (5HP)
  Braking resistor built-in type
  • FRN1.5C1S-4A21 : 1.5kW (2HP)
  • FRN2.2C1S-4A21 : 2.2kW (3HP)
  • FRN3.7C1S-4A21 : 3.7kW (5HP)
  IP40 enclosure type
  • FRN0.4C1J-4A : 0.4kW (1/2HP)
  • FRN0.75C1J-4A : 0.75kW (1HP)
  • FRN1.5C1J-4A : 1.5kW (2HP)
  • FRN2.2C1J-4A : 2.2kW (3HP)
  • FRN3.7C1J-4A : 3.7kW (5HP)
Close

Fuji Electric Frenic Mini C1 3-phase 400V Series

Frenic Mini C1 3-phase 400V Series Standard type FRN0.4C1S-4A : 0.4kW FRN0.75C1S-4A : 0.75kW FRN1.5C1S-4A : 1.5kW FRN2.2C1S-4A : 2.2kW FRN3.7C1S-4A : 3.7kW Semi-standard type EMC filter built-in type FRN0.4C1E-4A : 0.4kW FRN0.75C1E-4A : 0.75kW FRN1.5C1E-4A : 1.5kW FRN2.2C1E-4A : 2.2kW FRN3.7C1E-4A : 3.7kW Braking resistor built-in type FRN1.5C1S-4A21 : 1.5kW FRN2.2C1S-4A21 : 2.2kW FRN3.7C1S-4A21 : 3.7kW IP40 enclosure type FRN0.4C1J-4A : 0.4kW FRN0.75C1J-4A : 0.75kW FRN1.5C1J-4A : 1.5kW FRN2.2C1J-4A : 2.2kW FRN3.7C1J-4A : 3.7kW
Close

Fuji Electric Frenic-eHVAC AC Drives

Features Pursuit of cost competitiveness Competitiveness realized with optimum design Dedicated functionality for HVAC markets Fire mode (fan control), built-in PID/Cascade operation (pump control), etc. Built-in EMC filter as standard Built-in category C2/C3 EMC filter as standard, catering for a variety of environments. PM motor drive possible PM motor drive is now possible with PM sensorless vector control Enhanced customized logic Equipped with customized logic as standard to facilitate the free programming of up to 200 steps Unique functions tailored to the application or usage method can constructed Comprehensive communication support Equipped with BACnet communication protocol as standard to facilitate the productization of a variety of control and communication options. Construction of system support is made easy with these functions. - Standard support : RS485, Modbus RTU, BACnet MS/TP - Option support : Profibus DP, DeviceNet, Lonworks, CC-Link Multi-function keypad (option) A Multi-function keypad with support for 19 languages is available as an option to realize worlwide deployment.
Close

Fuji Electric FRN2.2LM1S-7EA Frenic Lift 1-phase 200V

Optimum Exclusive Design for Passenger Elevators
  • A braking circuit is built in the inverters of all the capacities
  • Built-in PG feedback circuit is standard equipment.
  • An optional keypad is available
  Higher Performance
  • Overload capacity : 200% for 10s
  • Current response : 5 times greater than previous models (corporated with the G11UD series
  • Reduction of torque ripple realizes low vibration
  • Reduced roll-back during starting up
  High performance vector control
  • Current response (ACR) : 500Hz
  • Speed control accuracy : ±0.01%
  High overload capacity
  • 200% of rated current for 10s (overload begins from 80% continous operation with a carrier frequency of 10kHz).