Showing 205–216 of 605 results

Show sidebar
Close

Inverter Toshiba P9 LV for Pumping Control

Once VLP point have been established, the P9 will perform the following functions
  • Monitor Multi-Pump Systems for Friction Losses, Impeller Variations, & Other System Variables
  • Adjust the System Accordingly to Ensure Only Necessary Pumps are Operating
  • Balance Flow Rates for Each Operating Pump Under All Conditions
  • Balances the Load for All Operating Pumps
Close

Inverter Toshiba G9 Series ASD

Special Features
  • Dynamic Braking Transistor
  • UL Type-1/NEMA 1 Enclosure
  • 100 KAIC or 200 KAIC Rating
  • UL Listed & Labeled
  • NEC 2005 Motor Overload Retention (No External Motor Overloads Required)
Close

Inverter Toshiba Tosvert VF-S11

Input Voltage/Capacity range :
  • 1 phase 200V 0.2~2.2kW
  • 3 phase 200V 0.4~15kW
  • 3 phase 400V 0.4~15kW
  • 3 phase 600V 0.75~15kW
  • 1 phase 200V 0.2~2.2kW (IP54)
  • 3 phase 400V 0.75~3.7kW (IP54)
Close

Inverter Toshiba VF-S15 1-phase 240V 0.2kW-2.2kW

Features Easy setting, simple operation with the large dial
  • Parameter can be set without power supply to the inverter
  • Showing most frequently used parameter in Easy mode
Close

Inverter Toshiba Tosvert VF-AS1 3-phase 400V 0.75kW-500kW

VF-AS1 3-phase 400V Models
  • VFAS1-4007PL = 0.75kW
  • VFAS1-4015PL = 1.5kW
  • VFAS1-4022PL = 2.2kW
  • VFAS1-4037PL = 3.7kW
  • VFAS1-4055PL = 5.5kW
  • VFAS1-4075PL = 7.5kW
  • VFAS1-4110PL = 11kW
  • VFAS1-4150PL = 15kW
  • VFAS1-4185PL = 18.5kW
  • VFAS1-4220PL = 22kW
  • VFAS1-4300PL = 30kW
  • VFAS1-4370PL = 37kW
  • VFAS1-4450PL = 45kW
  • VFAS1-4550PL = 55kW
  • VFAS1-4750PL = 75kW
Close

Inverter Toshiba Tosvert VF-AS1 3-phase 200V 0.4kW-75kW

VF-AS1 3-phase 200V Models
  • VFAS1-2004PL = 0.4kW
  • VFAS1-2007PL = 0.75kW
  • VFAS1-2015PL = 1.5kW
  • VFAS1-2022PL = 2.2kW
  • VFAS1-2037PL = 3.7kW / 4.0kW
  • VFAS1-2055PL = 5.5kW
  • VFAS1-2075PL = 7.5kW
  • VFAS1-2110PM = 11kW
  • VFAS1-2150PM = 15kW
  • VFAS1-2185PM = 18.5kW
  • VFAS1-2220PM = 22kW
  • VFAS1-2300PM = 30kW
  • VFAS1-2370PM = 37kW
  • VFAS1-2450PM = 45kW
  • VFAS1-2550P = 55kW
  • VFAS1-2750P = 75kW
Close

Inverter Toshiba Tosvert VF-NC3 0.1 ~ 3.7kW

Input voltage/Capacity range:
  • 1 phase 100V-0.1~0.75kW
  • 1 phase 200V-0.1~2.2kW
  • 3 phase 200V-0.1~3.7kW (Applied for 3 phase 200V motor)
Close

Inverter Toshiba Tosvert VF-FS1 0.4kW ~ 30kW

Capacity range:
  • 3ph 200V-0.4~30kW
  • 3ph 400V-0.4~75kW
  • 3ph 400V-0.75~75kW (IP54)
Close

Inverter Toshiba Tosvert VF-S15 0.2kW ~ 15kW

The new Toshiba VF-S15 standard general purpose drive, is designed for controlling wide range of variable torque and constant torque applications such as pumps, Fans, lifts, conveyors, machine tools, food processor and mixers as well as for process control in various types of industries.
Close

Allen Bradley Cylinder WorldClamp Clamp & Grip Sensors

Bulletin 871D WorldClamp™ Sensors are ideal for end-of-stroke detection in power clamp and gripper applications. Each sensor has two coils that detect whether the clamp or gripper is in the open or closed position. The two-sensor combination reduces the number of components required for these applications.
Close

Inverter Toshiba Tosvert VF-PS1 0.4kW ~ 630kW

Capacity range:
  • 3 phase 200V  0.4~90kW
  • 3 phase 400V  0.75~630kW
  • 3 phase 500V  1.5~500kW
  • 3 phase 575V  2.0~700HP
  • 3 phase 690V  2.2~630kW
  • 3 phase 400V  0.75~90kW (IP54)
 
Close

Allen Bradley CompactLogix 5380 Controllers

Features

  • Ideal for small to mid-size applications that require low axis motion and I/O point counts
  • Enable high-speed I/O, motion control, and Device Level Ring/Linear Topologies
  • Offer a 1 gigabit (Gb) embedded Ethernet port that enables high-speed communications, I/O, and motion control
  • Include dual configurable ports that supports Dual IP address
  • Provide enhanced diagnostics and troubleshooting
  • Offer controller functions optimized for maximum system performance
  • Offer enhanced security features which include digitally-signed controller firmware, controller-based change detection, and logging and role-based access control to routines and Add-On Instructions
  • Support up to 31 Bulletin 5069 Compact I/O modules
  • Offer Integrated Motion on EtherNet/IP up to 32 axes
  • Offer a wide range of memory options from 0.6...10 MB