Close
Allen Bradley Micro870 Programmable Logic Controller Systems
Features
- Offers 24-point controller
- Offers 280 KB memory that supports up to 128 KB user data and up to 20,000 program steps
- Includes 100 kHz high-speed counter (HSC) inputs on 24V DC models
- Provides embedded communications via USB programming port, non-isolated serial port (for RS-232 and RS-485 communications) and Ethernet port
- Supports up to three Micro800® plug-in modules
- Supports up to eight expansion I/O modules and up to 304 I/O points
- Provides embedded motion capabilities by supporting as many as two axes with PTO
- Communicates via EtherNet/IP™
- Operates in -20…65 °C (-4…149 °F) temperatures
Close
Analog I/O Melsec-Q Series
Current Input
Q62AD-DGH : 2 channels; input, 4 ~ 20 mA DC, conversion speed: 10 ms/2 channels, 18-point terminal block, channel isolated, supplies power to 2-wire transmitter
Q66AD-DG : 6 channels, input: 4 ~ 20 mA DC (when 2-wire transmitter is connected), 0 to 20 mA DC, conversion speed: 10 ms/channel, 40-pin connector, channel isolated, supplies power to 2-wire transmitter
Q68ADI : 8 channels, input: 0 ~ 20 mA DC, conversion speed: 80 μs/channel, 18-point terminal block
Close
Base Unit Melsec iQ-R PLC Mitsubishi
Used for installing various modules such as power supply, CPU and I/O. A selection of base units enable varying system sizes to be realized.
Close
CPU Melsec iQ-R PLC Mitsubishi
CPUs include various embedded features that enable them to perform a wide range of control tasks and come equipped with a built-in USB port and Ethernet port.
Close
Economical Switch Mode Power Supply
Kitoma Indonesia - Kitoma Indonesia menjual Economical Switch Mode Power Supply dengan berbagai models
S8JC-Z / S8JC-ZS 15/35/50/100/150/350-W Models
S8JC-Z/S8JC-ZS is our best standard power supply with CE Marking for
• Best standard power supply for material cost reduction.
• Ideal for export machines that safety standard is required.
• Time saving for installation by DIN-rail mounting.
Close
Fuji Electric Base Board Micrex-SX SPH
Base Board Micrex-SX SPH type
- NP1BS-03
- NP1BS-06
- NP1BS-08
- NP1BS-11
- NP1BS-13
- NP1BP-13
- NP1BS-08S
- NP1BS-11S
- NP1BS-13S
- NP1BP-13S
- NP1BS-08D
- NP1BS-11D
- NP1BS-13D
- NP1BP-13D
Close
Fuji Electric CPU Module PLC Micrex-SX SPH Series
Features
Ultra high-speed processing
The CPU module carries out the ultra high-speed processing in basic instructions as follows: SPH300 in 20ns, SPH200 in 70ns, SPH2000 in 30ns, and SPH3000 in 9ns.
Muiti-CPU configuration (SPH300/SPH2000/SPH3000)
Up to 8 CPUs can be configured while realizing the high-speed control by load distribution.
Redundancy (SPH300/SPH2000)
The 1 to 1 hot standby and the N to 1 cold standby improve the system safety and reliability. (The N to 1 cold standby is provided only to SPH300.)
IEC 61131-3
The series is fully compliant with the international standard language IEC 61131-3, which enables you to prepare the programming valid worldwide.
Compatible with USB and user ROM
The SPH300, SPH2000 and SPH3000 are provided as the USB and the user ROM versions in the separate format. (NP1PS-32R/74R/117R/245R, NP1PM-48R/48E/256E/256H and NP1PU-048E/256E)
Large-capacity battery (optional)
It is possible to extend the memory backup time to three and a half years (at 25°C) by adding an optional large-capacity battery to the SPH300 (74K/117K/245K steps).
SPH200
- NP1PH-08
- NP1PH-16
- NP1PS-74D
- NP1PS-32
- NP1PS-32R
- NP1PS-74R
- NP1PS-117R
- NP1PS-245R
- NP1PM-48R
- NP1PM-48E
- NP1PM-256E
- NP1PM-256H
- NP1PU1-256NE
- NP1PU2-048E
- NP1PU2-256E
- NP1PU-048E
- NP1PU-128E
- NP1PU-256E
Close
Fuji Electric PLC Micrex-SX SPH Series
I/O control with a program capacity of up to 256K steps and up to 655,36 points enables suitable system configuration ranging from small through to large scale. 1ms program scan and I/O refresh are possible. Function and performance distribution are possible in multi-CPU system configuration with up to 8 CPUs.
Close
FX3S PLC Mitsubishi Melsec F Series
FX3S - Keeping it Simple
Controllable I/O : 10 - 30 points
Main Unit I/O : 10/14/20/30 points
Close
FX3U Melsec F Series Main Units
FX3U Melsec F Series PLC Mitsubishi
Controllable I/O: 16 - 384 points with CC-Link or AS-i remote I/O
Main Unit I/O: 16/32/48/64/80/128 points
Close
FX5U CPU Melsec iQ-F PLC Mitsubishi
CPU module (service power built-in)
FX5U-32MR/ES : 32 points (input 16 point, output 16 point)
FX5U-32MT/ES : 32 points (input 16 point, output 16 point)
FX5U-32MT/ESS : 32 points (input 16 point, output 16 point)
Close
FX5UC CPU Unit Melsec iQ-F Mitsubishi
MELSEC iQ-F sequence execution engine that is the heart of the execution of the structured program or multiple programs, ST language, equipped with an execution engine capable of corresponding new development, such as the FB.