High Performance Multifunctional Inverters
FRN***G1S-2 type
- FRN0.4G1S-2A (3 phase 200V 0.4kW)
- FRN0.75G1S-2A (3 phase 200V 0.75kW)
- FRN1.5G1S-2A (3 phase 200V 1.5kW)
- FRN2.2G1S-2A (3 phase 200V 2.2kW)
- FRN3.7G1S-2A (3 phase 200V 3.7kW)
- FRN5.5G1S-2A (3 phase 200V 5.5kW)
- FRN7.5G1S-2A (3 phase 200V 7.5kW)
- FRN11G1S-2A (3 phase 200V 11kW)
- FRN15G1S-2A (3 phase 200V 15kW)
- FRN18.5G1S-2A (3 phase 200V 18.5kW)
- FRN22G1S-2A (3 phase 200V 22kW)
- FRN30G1S-2A (3 phase 200V 30kW)
- FRN37G1S-2A (3 phase 200V 37kW)
- FRN45G1S-2A (3 phase 200V 45kW)
- FRN55G1S-2A (3 phase 200V 55kW)
- FRN75G1S-2A (3 phase 200V 75kW)
- FRN90G1S-2A (3 phase 200V 90kW)
Ideal for highly accurate control such as positioning
PG Vector Control
Effective in providing highly accurate control for applications such as printing press
- Speed control range : 1 : 1500
- Speed response : 100Hz
- Speed Control Accuracy : ± 0.01%
- Current Response : 500Hz
- Torque Accuracy : ± 10%
*The option card is required separately
*The above specifications may vary depending on the environment or condition for use
HD (High Duty) specification for heavy load
|
Item
|
Specifications
|
||||||||||||||||||
| Type (FRN□□□G1S-2□) |
0.4
|
0.75
|
1.5
|
2.2
|
3.7
|
5.5
|
7.5
|
11
|
15
|
18.5
|
22
|
30
|
37
|
45
|
55
|
75
|
90
|
||
| Nominal applied motor [kW] (*1) |
0.4
|
0.75
|
1.5
|
2.2
|
3.7
|
5.5
|
7.5
|
11
|
15
|
18.5
|
22
|
30
|
37
|
45
|
55
|
75
|
90
|
||
| Output ratings | Rated capacity [kVA] (*2) |
1.1
|
1.9
|
3.0
|
4.2
|
6.8
|
10
|
14
|
18
|
24
|
28
|
34
|
45
|
55
|
68
|
81
|
107
|
131
|
|
| Rated voltage [V] (*3) |
Three-phase 200 to 240V (with AVR)
|
Three-phase 200 to 230V (with AVR)
|
|||||||||||||||||
| Rated Current [A] |
3
|
5
|
8
|
11
|
18
|
27
|
37
|
49
|
63
|
76
|
90
|
119
|
146
|
180
|
215
|
283
|
346
|
||
| Overload capability |
150% for 1min, 200% for 3.0s
|
||||||||||||||||||
| Rated frequency [Hz] |
50, 60Hz
|
||||||||||||||||||
| Input ratings | Main circuit power Phases, voltage, frequency |
Three-phase 200 to 240V, 50/60Hz
|
Three-phase 200 to 220V, 50Hz
Three-phase 200 to 230V, 60Hz |
||||||||||||||||
| Auxiliary control power input Phases, voltage, frequency |
–
|
Single-phase 200 to 240V, 50/60Hz
|
Single-phase 200 to 230V, 50/60Hz
|
||||||||||||||||
| Auxiliary power input for fan Phases, voltage, frequency (*5) |
–
|
Single-phase 200 to 220V, 50Hz
Single-phase 200 to 230V, 60Hz |
|||||||||||||||||
| Voltage, frequency variations |
Voltage:+10 to -15% (Voltage unbalance:2% or less (*6)) Frequency:+5 to -5%
|
||||||||||||||||||
| Rated current [A] (*7) | with DCR |
1.6
|
3.2
|
6.1
|
8.9
|
15
|
21.1 |
28.8
|
42.2
|
57.6
|
71.0
|
84.4
|
114
|
138
|
167
|
203
|
282
|
334
|
|
| without DCR |
3.1
|
5.3
|
9.5
|
13.2
|
22.2
|
31.5
|
42.7
|
60.7
|
80.1
|
97.0
|
112
|
151
|
185
|
225
|
270
|
–
|
–
|
||
| Required power supply capacity [kVA] (*8) | with DCR |
0.6
|
1.2
|
2.2
|
3.1
|
5.2
|
7.4
|
10
|
15
|
20
|
25
|
30
|
40
|
48
|
58
|
71
|
98
|
116
|
|
| Braking | Torque [%] (*9) |
150%
|
100%
|
20%
|
10 to 15%
|
||||||||||||||
| Braking transistor |
Built-in
|
–
|
|||||||||||||||||
| Min. ohmic value [Ω] Torque [%] |
100
180% |
40
180% |
24
180% |
16
180% |
12
180% |
8
180% |
6
180% |
4
180% |
–
|
||||||||||
| Built-in braking resistance |
100Ω
|
40Ω
|
20Ω
|
–
|
|||||||||||||||
|
Braking time[s]
|
5s
|
–
|
|||||||||||||||||
|
%ED
|
5
|
3
|
5
|
3
|
2
|
3
|
2
|
–
|
|||||||||||
| DC injection braking |
Starting frequency:0.0 to 60.0Hz, Braking time: 0.0 to 30.0s, Braking level:0 to 100%
|
||||||||||||||||||
| DC reactor (DCR) (*10) |
Optional
|
Standard accessory
|
|||||||||||||||||
| Applicable safety standards |
UL508C, C22.2No.14 (pending), EN61800-5-1:2003
|
||||||||||||||||||
| Enclosure (IEC60529) |
IP20 (IEC60529) closed type, UL open type (UL 50)
|
IP00 open type, UL open type
|
|||||||||||||||||
| Cooling method |
Natural cooling
|
Fan cooling
|
|||||||||||||||||
| Weight/Mass [kg] |
1.7
|
2
|
2.8
|
3
|
3
|
6.5
|
6.5
|
5.8
|
9.5
|
9.5
|
10
|
25
|
32
|
42
|
43
|
||||
(*1) Fuji’s 4-pole standard motor.
(*2) Rated capacity is calculated by assuming the output rated voltage as 220V for three-phase 200V series and 440V for three-phase 400V series.
(*3) Output voltage cannot exceed the power supply voltage.
(*4) When using the inverter in the ambient temperature of 40°C or over and with carrier frequency at 3kHz or higher, adjust the current under continuous running to be the value in ( ) or lower by controlling the load.
(*5) The auxiliary power input is used as an AC fan power input when combining the unit such as high power factor PWM converter with power regenerative function. (Generally not used.)
(*6) Interphase voltage unbalance ratio[%] = (max. voltage [V] – min. voltage [V])/3-phase average voltage [V]×67(See IEC61800-3.) Use the DC reactor (ACR: optional) when used with 2 to 3 % of unbalance ratio.
(*7) The value is calculated on assumption that the inverter is connected with a power supply capacity of 500kVA (or 10 times the inverter capacity if the inverter capacity exceeds 50kVA) and %X is 5%.
(*8) Obtained when a DC reactor (DCR) is used.
(*9) Average braking torque obtained by use of a motor. (Varies with the efficiency of the motor.)
(*10) The 55kW DC reactor (DCR) is optional with HD spec, and is provided as a standard accessory with LD spec.
LD (Llow Duty) Spec for light load
|
Item
|
Specifications
|
|||||||||||||
| Type (FRN□□□G1S-2□) |
5.5
|
7.5
|
11
|
15
|
18.5
|
22
|
30
|
37
|
45
|
55
|
75
|
90
|
||
| Nominal applied motor [kW] (*1) |
7.5
|
11
|
15
|
18.5
|
22
|
30
|
37
|
45
|
55
|
75
|
90
|
110
|
||
| Output ratings | Rated capacity [kVA] (*2) |
11
|
16
|
20
|
25
|
30
|
43
|
55
|
68
|
81
|
107
|
131
|
158
|
|
| Rated voltage [V] (*3) |
Three-phase 200 to 240V (with AVR)
|
Three-phase 200 to 230V (with AVR)
|
||||||||||||
| Rated Current [A] (*4) |
31.8
(29) |
46.2
(42) |
59.4
(55) |
74.8
(68) |
88
(80) |
115
(107) |
146
|
180
|
215
|
283
|
346
|
415
|
||
| Overload capability |
120% for 1min
|
|||||||||||||
| Rated frequency [Hz] |
50, 60Hz
|
|||||||||||||
| Input ratings | Main circuit power Phases, voltage, frequency |
Three-phase 200 to 240V, 50/60Hz
|
Three-phase 200 to 220V, 50Hz
Three-phase 200 to 230V, 60Hz |
|||||||||||
| Auxiliary control power input Phases, voltage, frequency |
Single-phase 200 to 240V, 50/60Hz |
Single-phase 200 to 230V, 50/60Hz
|
||||||||||||
| Auxiliary power input for fan Phases, voltage, frequency (*5) |
–
|
Single-phase 200 to 220V, 50Hz
Single-phase 200 to 230V, 60Hz |
||||||||||||
| Voltage, frequency variations |
Voltage:+10 to -15% (Voltage unbalance:2% or less (*6)) Frequency:+5 to -5%
|
|||||||||||||
| Rated current [A] (*7) | with DCR |
28.8
|
42.2
|
57.6
|
71.0
|
84.4
|
114
|
138
|
167
|
203
|
282
|
334
|
410
|
|
| without DCR |
42.7
|
60.7
|
80.1
|
97.0
|
112
|
151
|
185
|
225
|
270
|
–
|
–
|
–
|
||
| Required power supply capacity [kVA] (*8) | with DCR |
10
|
15
|
20
|
25
|
30
|
40
|
48
|
58
|
71
|
98
|
116
|
143
|
|
| Braking | Torque [%] (*9) |
70%
|
15%
|
7 to12%
|
||||||||||
| Braking transistor |
Built-in
|
–
|
||||||||||||
| Min. ohmic value[Ω] Torque [%] |
16
130% |
12
120% |
8
130% |
6
140% |
4
150% |
4
130% |
–
|
|||||||
| Built-in braking resistance |
20Ω
|
–
|
||||||||||||
|
Braking time[s]
|
3.7s
|
3.4s
|
–
|
|||||||||||
|
%ED
|
2.2
|
1.4
|
–
|
|||||||||||
| DC injection braking |
Starting frequency:0.0 to 60.0Hz, Braking time: 0.0 to 30.0s, Braking level:0 to 80%
|
|||||||||||||
| DC reactor (DCR) (*10) |
Optional
|
Standard accessory
|
||||||||||||
| Applicable safety standards |
UL508C, C22.2No.14 (pending), EN61800-5-1:2003
|
|||||||||||||
| Enclosure (IEC60529) |
IP20 (IEC60529) closed type, UL open type(UL 50)
|
IP00 open type, UL open type
|
||||||||||||
| Cooling method |
Fan cooling
|
|||||||||||||
| Weight/Mass [kg] |
6.5
|
6.5
|
5.8
|
9.5
|
9.5
|
10
|
25
|
32
|
42
|
43
|
||||
